Are you looking for some bee hive removal tips? You’ve come to the right place. The most difficult part of removing a bee hive from your home is the time it takes between the bee’s removal and when they are all gone. This can take several days, even if you’ve found an unfriendly area. Here are some tips for preparing for this upcoming ordeal.
First of all, you need to locate where the hive is located. This may sound obvious but is one of the biggest mistakes I see with removal. It is often times the case that people assume that the spot they have found the hive is where the hive is going to be removed. You’ve got to prep the area for the removal. Start by filling the hole you will be removing the hive from with a substance that does not contain bee larvae.
This is done through the use of a special rate based product. It is also important that you have no visible signs of the hive such as wax or plastic. This will help prevent other bees from taking advantage of the bee removal process. The borate solution should be mixed into the hole until you get a thick consistency. Do not pour too much into the hole because you do not want the bees flying out the hole as this could cause them to drown. Click here for more information about Cave Creek Bee removal
Once the borate has completely set, it is time to work on removing the hive itself. This is best done by using a pressure washer. The main idea here is to keep the hive close to the ground. Bees will tend to sting when being forcefully removed. If they are able to cling, you may need to use gloves or something else to protect your hands. A good thing to remember is to wear latex gloves during this step.
Now it’s time to remove the hive by hand. This can be tricky if you have a lot of bees around. I recommend using a combination pry bar and a hammer to break down the hive until you can dig it all out. When removing the hive, you may find it easier to get at the hive body if it is laying down slightly. You can push this aside, if you prefer.
Once you have removed the hive, you may want to vacuum the remains to get rid of any remaining wax. Remember to clean the surface thoroughly before re-starting your hive. With these simple tips for the preparation, you can be sure that you don’t have to worry about the bees at all. Good luck!